Helpful Hints
Cleaning Instructions
Multi-Purpose Cloth Projects
 
Shhh... Baby Is Sleeping Door Hanger Instructions:  

file:///Z:/TLC/ACTDB/Website%20Projects/Project%20Picture%20Scans/Cropped/Website%20Multi-Purpose%20Cloth%20Project%20Pictures/Door%20Hanger%20Photo.JPG

SUPPLIES:

Roc-lon® Multi-Purpose Cloth™ - White
2 pieces 4” w x 6”h
*CD-ROM image of your choice (specific image shown listed below)
** High quality iron-on transfer of your choice (specific image shown listed below)
Embroidery thread
1/3 yard ribbon
2 decorative buttons
Fabric glue
Pinking shears (optional)
Rotary cutter
Mat
Quilters ruler

EMBROIDERY INSTRUCTIONS:

Embroider “Shhh…” on one piece of the cloth.

PRINTING INSTRUCTIONS - IRON-ON TRANSFER:

Print the image onto the iron-on transfer following manufacturer’s instructions. Use only one sheet in the printer at a time for best results. Cut image out.

APPLICATION INSTRUCTIONS - IRON-ON TRANSFER:

Remove the paper backing from the transfer. Center the image on the front of the hanger. Fuse the image following manufacturer’s instructions. Be sure to use the parchment paper manufacturer recommends when pressing the transfer in place.

CONSTRUCTION:

Place the embroidered holder on top of the blank holder. Stitch together ½” from all edges. You can use a decorative machine stitch if you like. You can leave the edges straight or use the pinking shears to trim the edges for a more decorative look. Using the picture as a guide, place the ends of the ribbon on top of the holder. Glue in place. Thread the buttons with decorative thread so that it looks like they have been sewn. Glue the buttons over the edges of the ribbon.

* Click-n-Craft® Little Ones CD-ROM Image from the Vintage Workshop®
** Click-n-Craft® Iron-On-Transfer II from the Vintage Workshop®

 


back to top